Skip to main content

Cutimed® Sorbion® Sana Dressings

Cutimed® Sorbion® Sana Dressings are superabsorbent dressings that offer atraumatic removal. The outer wound contact layer's 3D structure and smooth surface facilitates the fluid flow in the direction of the dressing, while offering few points of access for tissue ingowth, which provides a protective layer against adherence to the wound bed.

Essity

Hydrofera, LLC and BSN Medical Inc. are Essity-owned companies. Essity is a leading global hygiene and health company dedicated to improving well-being through products and solutions. They provide high quality wound and incontinence care, orthopedic, and compression products. Essity sells in approximately 150 countries under leading global brands Cutimed®, Hydrofera Blue®, Leukoplast®, JOBST®, Delta-Cast®, and TENA®.
Toll free:(800) 552-1157 Website: www.essityusa.com
Benefits

• Optimizes fluid management during granulation phase
• Non-sensitizing, ideal for sensitive skin
• Up to 7 days wear time if clinical conditions allow
• Maximum absorption and exudate retention
• Protects against bioburden recontamination through exudate retention capacity
• Flexible and conformable
• Atraumatic dressing changes
• Can apply either side down
• Promotes optimal wound healing conditions and provides soft debridement
• Ideal for compression therapy

Indications

Cutimed® Sorbion® Sana Dressings are intended for the treatment of wounds with low to excessive exudate levels, such as pressure injuries, diabetic foot ulcers, venous leg ulcers, and other wounds healing through secondary intention, dehisced wounds, on donor sites and fragile/compromised skin.

Contraindications

Should not be used for indications other than those mentioned. Should not be used in patients who are known to have adverse reactions to polyethylene or polypropylene.

Warnings and Precautions

Do not use on dry or drying wound areas and other areas with little or no exudate. Do not use on sensitive areas such as mucous membranes or the eye. Not indicated for third-degree burns. Do not use on exposed bone, muscle or tendon. Does not provide control or treatment of infection. Product expands as it absorbs, it is important to provide room for product expansion. When applying to a deep cavity, the wound should be monitored closely. Failure to change the dressing regularly as indicated will increase the weight of the product and could therefore cause pressure to the tissue and vessels. The intervals of the changing have to be determined by a physician in charge. Do not use in direct contact with pressure sensitive parts of the body. Do not apply dressing to the respiratory tract or any parts thereof, such as mouth or nose, nor to the ears or other orifices of the body. Do not eat, inhale or ingest any of the dressing components. Should not be used in combination with therapies involving increased heat development or in which high-energy radiation is used, since this can compromise the mechanical integrity of the product. Is not approved for use on patients with diseases like epidermolysis bullosa or Steven Johnson syndrome. Use only on indicated wounds with moderate to strong exudate levels. Should be used only under the supervision of a qualified medical professional.

Adverse Effects/Reactions

The dressing can absorb large quantities of fluid, which can cause increased pressure of the wound bed and may result in diminished tissue perfusion.

Storage Requirements

Store in dry place at 50°F-77°F (10°C-25°C) and 30%-50% relative air humidity.

How Supplied/Sizing
Gentle: 3.5"x3.5", 5"x5", 5"x9", 9"x9", 9"x13". Multi star: 4.5", 6.5" diameter.
HCPCS Code
Product features
cancel Adhesive border
cancel Antimicrobial format available
cancel Compatible w/ topicals
cancel Cuttable
check_circle Flexible
check_circle Intact when saturated
check_circle Moisture vapor permeable
check_circle Non-linting
check_circle One-piece removal
check_circle Secondary dressing required
cancel Self-adhering
cancel Silicone-based adhesive
cancel Usable on infected wounds
check_circle Variety of sizes
Other features
check_circle Educational Material Available
check_circle Free Samples/Trials Available
check_circle Published Clinical Article Available
Recommended Use

Acute Wounds
Chronic Wounds
Dehisced Wounds
Diabetic Foot Ulcers
Donor Sites
Fragile or Compromised Skin
Moderate/Highly Exudating Wounds
Pressure Injuries
Surgical Wounds
Venous Leg Ulcers

Mode of Use/Application

Cleanse the wound as directed by a medical professional with a sterile saline solution or other standard wound cleansing product and/or procedure. Debridement may be indicated.

Select suitable product size. Do not cut or open the dressing. Folding Sorbion® Sana Dressings must also be avoided, as this reduces the product's absorbing capacity. Cover or fixate Sorbion® Sana Dressings by applying a secondary dressing appropriate for the wound condition. Take expansion during absorption into consideration and allow enough room for dressing expansion. Ensure there is sufficient contact between the wound surface and the inner layer. This is the only way to ensure the desired fluid absorption and to reduce the risk of maceration of the wound environment.

Removal & Change Frequency

The Sorbion® Sana Dressings should be examined for saturation regularly, particularly during the early phases of wound management or when used in tunneling wounds. The Sorbion® Sana Dressings should be removed before becoming completely saturated with fluid and before fluid penetrates the back of the dressing. The Sorbion® Sana Dressings should be changed in a timely and regular manner based on the amount of exudate absorbed by the dressing and in accordance with wound care protocols and proper medical practice.

Additional Recommended Dressings

Hypafix®, Hypafix® Skin Sensitve, and Cover-Roll® Stretch

No posters match your selected filters. Remove some filtres, or reset them and start again.

Have a product to submit?

Be included in the most comprehensive wound care products directory
and online database.
Learn More