Skip to main content

Therabond® 3D Antimicrobial Systems with Silvertrak™ Technology

Therabond® 3D Antimicrobial Systems are absorbent, post-operative dressings consisting of silver-plated nylon three-dimensional fabric. Provides an effective barrier to bacterial penetration for up to 14 days. In the presence of exudate, the dressing will help maintain a moist wound environment.

Argentum Medical, LLC

Argentum Medical, LLC is the manufacturer of the Silverlon™ family of advanced seven day use antimicrobial metallic silver burn, wound, surgical, negative pressure and IV catheter dressings.
Toll free:(888) 551-0188 Fax:(630) 232-8005 Website: www.silverlon.com
Benefits

• Kills pathogens on contact
• Achieves 99.99% reduction of pathogens at 15 minutes
• Proven broad spectrum antimicrobial protection for up to 14 days
• Kills a broad range of pathogens including MRSA and VRE
• Promotes an optimal healing environment
• Actively transports excess fluid and exudate (cellular debris) away from the wound
• Controls maceration and bioburden
• Fewer dressing changes
• Durable, flexible material adapts to the patient's anatomy and the wound
• Soft, silver nylon material breathes and moves with the patient to minimize friction
• Provides gentle compression
• Enhances patient comfort
• Non-staining
• Easy to apply

Indications

TheraBond®3D is indicated for use in light to moderately exuding partial- and full-thickness wounds including traumatic wounds, surgical wounds, donor sites, first- and second-degree burns, as well as pressure ulcers, diabetic ulcers and vascular ulcers. TheraBond®3D may be used over debrided and partial-thickness wounds.

Contraindications

Do not use on patients with a known sensitivity to silver.
Do not use on patients during MRI (Magnetic Resonance Imaging) examination.
Prior to commencing radiation therapy, remove TheraBond®3D. Apply a new TheraBond®3D Antimicrobial Barrier System following treatment.

Warnings and Precautions

For external use only.
TheraBond®3D is not compatible with oil-based products such as petrolatum.
TheraBond®3D may not be compatible with topical antimicrobials.
Do not use TheraBond®3D with saline solutions or povidone iodine.
Avoid contact with electrodes or conductive gels during electronic measurements e.g. EEG and ECG.
TheraBond®3D is not intended to provide treatment for infected wounds.
TheraBond®3D may be used on infected wounds which are being managed in accordance with institutional clinical protocols for infection abatement as an adjunct to the standard treatment regimen to provide a barrier to bacterial infection.
If reddening or sensitization of the skin occurs, discontinue use.
TheraBond®3D should only be used in premature infants (less than or equal to 37 weeks gestation) when clinical benefit outweighs any potential patient risks.

Storage Requirements

Store at room temperature.

Active Ingredients

Silver, 15% by weight

Inactive Ingredients

Nylon

How Supplied/Sizing
Contact: 1(1/2)"x6", 1(1/2)"x10", 4(1/2)"x4(1/4)", 4"x8", 8"x16", 24"x24". Wraps: 4"x72", 6"x96". Island: 2"x2", 4"x5", 4"x6", 4"x8", 4"x10", 4"x12". Island-XS: 4"x10", 4"x14". Gloves: Medium, large, x-large.
HCPCS Code
Product features
cancel Absorptive dressing format
cancel Alginate dressing format
cancel Antimicrobial effects up to 48 hours
cancel Antimicrobial effects up to 3 days
cancel Antimicrobial effects up to 7 days
cancel Bacterial binding
cancel Bacterial trapping
check_circle Bactericidal
check_circle Bactericidal broad-spectrum
cancel Bacteriostatic
cancel Collagen dressing format
cancel Composite dressing format
check_circle Contact layer dressing format
cancel Foam dressing format
cancel Fungicidal
cancel Gauze or non-woven dressing format
cancel Gelling fiber dressing format
cancel Hydrogel (amorphous) dressing format
cancel Hydrogel (impregnated) dressing format
cancel Hydrogel (sheet) dressing format
cancel Impermeable to outside contaminants
cancel Impregnated dressing format
cancel Microbicidal
cancel Moisture vapor permeable
cancel Secondary dressing required
cancel Silicone-based adhesive
cancel Sporicidal
cancel Super absorbent polymers
cancel Sustained release formula
cancel Transparent film dressing format
cancel Virucidal
cancel Wound filler dressing format
Other features
check_circle Educational Material Available
check_circle Free Samples/Trials Available
cancel Published Clinical Article Available
Recommended Use

Acute Wounds
Chronic Wounds
Deep Wounds
Dehisced Wounds
Diabetic Foot
First- and Second-Degree Burns
Granulating/Epithelializing Wounds
Infected Wounds
Moderate/Highly Exuding Wounds
Non/Minimally Exuding Wounds
Palliative Wounds
Pressure Ulcers
Sloughy Wounds
Superficial Wounds
Surgical Wounds
Traumatic Wounds
Venous Ulcers

Mode of Use/Application

Island Systems:
Cleanse wound with sterile water. Choose a system where the pad completely covers the wound. Remove system from sterile pouch, using aseptic technique.
To apply: remove half of the release paper and place silver pad in contact with the wound. Remove second half of the release paper and smooth system down.
To remove: lift one corner and slowly remove in a motion parallel to the skin. Dressing should be changed based on the amount of exudate or the condition of the wound.
Note: The system may adhere on wounds that are dry or have very light exudate. If the system is not easily removed, then moisten or soak to assist removal.

Wraps and Contact Systems:
Cleanse wound with sterile water. Choose a system that completely covers the wound. Remove system from sterile pouch, using aseptic technique.
To apply: moisten the system with sterile water and place the textured side in contact with the wound. Cover and secure the system periwound care protocol.
To remove: lift one corner and slowly remove in a motion parallel to the skin. Dressing should be changed based on the amount of exudate or the condition of the wound.
Note: The system may adhere on wounds that are dry or have very light exudate. If the system is not easily removed, then moisten or soak to assist removal.

Removal & Change Frequency

Dressing should be changed based on the amount of exudate or the condition of the wound.

Additional Recommended Dressings

Contact and wrap dressings should be used in conjunction with an outer absorbent dressing.

No posters match your selected filters. Remove some filtres, or reset them and start again.

Have a product to submit?

Be included in the most comprehensive wound care products directory
and online database.
Learn More